Polymers

Poylmers


ABS (Acrylonitrile Butadiene Styrene)

ABS is produced in more than 50 grades in general purpose, special grades and heat resistant grades. ABS resins are easily injection molded, extrusion molded vacuum molded, thermoformed and blow molded. Final products have excellent dimensional stability and glossy surface.


EPS (Expandable Polystyrene)

Polystyrene is extracted from oil. Thousands of small units of styrene, called monomers, link together to form large molecules of polystyrene by a process called polymerization.
The Expandable Polystyrene (EPS) production process uses a pure hydrocarbon, which does not contain any halogens and does not damage the earth’s protective ozone layer, as the expansion agent.


GPPS (General Purpose PolyStyrene)

GPPS is a clear poly styrene that exhibits high stiffness, good dimensional stability, low specific gravity and excellent electrical properties.


HIPS (High Impact PolyStyrene)

High Impact Polystyrene, it is a tough, rigid plastic material with high impact strength which can be guillotined, punched, routered or sawn easily, and is readily available in a wide variety of colors.


HDPE (High Density Polyethylene)

High-density polyethylene (HDPE) is a polyethylene thermoplastic made from petroleum. With a high strength-to-density ratio. The density of HDPE can range from 0.93 to 0.97 g/cm3 or 970 kg/m3


LDPE (Low Density Polyethylene)

Low-density polyethylene (LDPE) is a thermoplastic made from the monomer ethylene. LDPE is defined by a density range of 0.910–0.940 g/cm3. Despite competition from more modern polymers, LDPE continues to be an important plastic grade.


LLDPE (Linear Low Density Polyethylene)

LLDPE is a substantially linear Polyethylene, with significant numbers of short branches, commonly made by copolymerization of ethylene with longer-chain olefins.


PC (Poly Carbonate)

PC are a group of thermoplastic polymers which  received their name because they are polymers containing carbonate groups  A balance of useful features, including temperature resistance, impact resistance and optical properties, positions polycarbonates between commodity plastics and engineering plastics.


PVC (Polyvinyl chloride)

 Polyvinyl chloride is commonly abbreviated PVC, is the world’s third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene.  PVC is used extensively across a broad range of industrial, technical and everyday applications including widespread use in building, transport, packaging, electrical/electronic applications.


PP (Polypropylene)

Polypropylene (PP) is a thermoplastic made from the combination of propylene monomers. It is used in a variety of applications to include packaging for consumer products, plastic parts for various industries including the automotive industry, special devices like living hinges, and textiles.


PET (Polyethylene Terephthalate)

Polyethylene terephthalate  commonly abbreviated PET is the most common thermoplastic polymer resin of the polyester family and is used in fibers for clothing, containers for liquids and foods.

Thermoplastic & Engineering Polymers Marketing & Sales / Dept


Print Friendly, PDF & Email